Table of Contents
Advertisement
Setup menus
USER menu
<BASIC>
No./Item
009
This sets the position of the characters on the
horizontal plane for the time code and other
CHARA H-POS
super displays output to the VIDEO OUT 3/
SDI OUT 3 connector.
0000
:
0004
:
0016
16
<Note>
When setting this item, the DISPLAY SEL status
is output to VIDEO OUT 3/SDI OUT 3 even if
SUPER OFF has been set. However, when the
menu is exited, operation complies with the
SUPER OFF/ON setting.
Also, CHARA TYPE is output to VIDEO OUT
3/SDI OUT 3 according to the status set in the
menu.
010
This sets the position of the characters on the
vertical plane for the time code and other
CHARA V-POS
super displays output to the VIDEO OUT 3/
SDI OUT 3 connector.
[525i system] [625i system]
0000
:
0018
18 0023
:
0022
22 0028
<Notes>
OWhen setting this item, the DISPLAY SEL
status is output to VIDEO OUT 3/SDI OUT 3
even if SUPER OFF has been set. However,
when the menu is exited, operation complies
with the SUPER OFF/ON setting.
OWhen the DISPLAY SEL setting causes
characters to extend beyond the edges of the
screen, the setting value is changed so that the
characters are automatically displayed in a
position on the screen.
011
This selects the display type for the super
display output to the VIDEO OUT 3/SDI OUT 3
CHARA TYPE
connector as well as for displays such as the
setting menu, etc.
0000
WHITE : White characters against a black
0001
W/OUT : White characters with a black
012
This sets the VTR's recording and playback
format.
SYS FORMAT
0000
50M :
DVCPRO50 (50 Mbps) is selected.
0001
25M :
DVCPRO (25 Mbps) is selected.
<Note>
The format complies with the setting of this menu
item when the tape is ejected.
The underlined items indicates the initial setting.
Description
0
:
4
:
SD955A
0 0000
0
:
:
:
23
:
:
:
28
background.
border.
No./Item
013
This sets the format in which the tape is to be
played back.
PB FORMAT
0000 MANUAL :
The format complies with the setting of setup
menu No. 012 (SYS FORMAT) when a
DVCPRO cassette is inserted.
The format complies to the format recorded on
the tape when a DV or DVCAM cassette is
inserted.
0001
AUTO :
The format complies with the format recorded
on the tape.
<Notes>
OWhen an editing mode has been selected, the
"MANUAL" setting is forcibly established for
internal operations.
OWhen AUTO has been selected, the picture
and sound may be disturbed until the format is
detected after a tape is loaded.
015
SD955A
This sets whether the recorder is to be
forcibly set to the EE mode and the player's
MONI
playback signals are to be output to the
CONTROL
monitor by pressing the recorder's PLAYER
button when a monitor has been connected
only to the recorder during deck-to-deck
editing.
0000
MANU :
The recorder is not forcibly set to the EE mode.
0001
AUTO :
The recorder is forcibly set to the EE mode,
and the player's playback signals are output.
017
This selects the size of the characters for the
superimposed display output from the VIDEO
CHARA SIZE
OUT 3 or SDI OUT 3 connector.
0000 NORMAL : Standard size
0001 LARGE : 4 times larger than the standard
<Note>
When LARGE has been selected, only time data
is displayed, regardless of the setup menu
No.008 (DISPLAY SEL) setting.
070
This selects the TV system.
SD955A
TV SYSTEM
0000
525 : The 525 interlace/59.94 Hz
0001
625 : The 625 interlace/50 Hz system
<Note>
After this setting is changed, turn off and back on
the power again to take it effect.
Description
size
system is selected.
is selected.
35
Advertisement
Table of Contents
