Table of Contents
Advertisement
Setup menus
USER menu
<BASIC>
No./Item
000
This sets the preroll time.
The preroll time can be set from 0 to 15 seconds
P-ROLL TIME
in 1-second increments.
0000
0s
:
0005
5s
:
0015
15s
001
This selects the buttons which can be operated
on the front panel when the CONTROL switch
LOCAL ENA
has been set to REMOTE.
0000
DIS :
No buttons can be operated.
0001
ST&EJ :
Only the STOP and EJECT buttons can be
operated.
0002
ENA :
AJ-SD955A: All
AJ-SD930: All buttons can be operated.
002
This selects the 12 or 24 hour display for the
CTL counter.
TAPE TIMER
0000
±12h : 12 hour display
0001
24h : 24 hour display
003
This selects whether the remaining tape time
and total tape length are to be displayed in the
REMAIN SEL
superimposed display of the VIDEO OUT 3/
SDI OUT 3 connector signals.
0000
OFF : No display.
0001
2L :
The remaining tape time is displayed on the
second line.
0002
1L :
The remaining tape time is displayed on the
first line.
0003
R/TTL :
The remaining tape time is displayed on the
first line, and the total tape length is displayed
in the second line.
<Notes>
OWhen "2L" is selected, the remaining tape time
is not displayed if "TIME" has been selected as
the setup menu item No.008 (DISPLAY SEL)
setting.
OWhen "R/TTL" is selected, the total tape length
is not displayed if "TIME" has been selected as
the setup menu item No.008 (DISPLAY SEL)
setting.
The underlined items indicates the initial setting.
34
Description
<Note>
:
When the automatic editing
mode [PREVIEW, AUTO EDIT]
is set, the unit will not operate if
:
the preroll time is set to 0
seconds.
buttons
except
for
RECORDER
and
PLAYER
buttons can be operated.
No./Item
006
SD955A
This selects whether or not to synchronize
between two VTRs.
SYNCHRONIZE
0000
No synchronization. The editing points deviate
several frames, but editing can be started
quickly.
0001
Synchronization. Allows for error-free editing.
008
This selects what information is to be
provided by the time code and other super
DISPLAY SEL
displays output to the VIDEO OUT 3/SDI OUT 3
connector.
0000
(The data indicates the value for whichever of
CTL, TC or UB currently selected by the
COUNTER button.)
0001
0002 T&S&M : Data,
the
0003
0004 T&YMD :
Data and REC DATE (year/month/day)
0005 T&MDY :
Data and REC DATE (month/day/year)
0006 T&DMY :
Data and REC DATE (day/month/year)
0007
Data and user's bit.
However, when UB has been selected with the
COUNTER button, the time code is displayed
after the user's bit.
0008
Data and CTL data.
However, when CTL has been selected with
the COUNTER button, the time code is
displayed after the CTL data.
0009
Data and time code.
<Notes>
OMode display:
DVCPRO 50 (50 Mbps) = DVCPRO_50,
DVCPRO (25 Mbps) = DVCPRO,
DV = DV, DVCAM = DVCAM
OAn error message appears if a warning or error
has occurred when "T&S&M" has been
selected as this setting.
OREC TIME and REC DATE are displayed
during DV/DVCAM, playback only. With the
DVCPRO50 (50 Mbps) or DVCPRO (25 Mbps)
format, the operating mode is displayed.
Description
OFF :
ON :
TIME : Data only.
T&STA : Data and operation status.
operation
status
mode.
T&RT : Data and REC TIME
T&UB :
T&CTL :
T&T :
and
Advertisement
Table of Contents
