Table of Contents
Advertisement
5
Follow the onscreen instructions to map
the connected device to the audio inputs
on your SoundStage.
•
If you connect your SoundStage to the
TV through an HDMI ARC connection,
make sure that the TV audio is mapped
to the ARC input on your SoundStage.
Connect and set up a home
network
Connect your SoundStage to a network router
for a network setup, and enjoy:
•
Streamed multimedia content (see 'Browse
PC through DLNA' on page 20)
•
Smart TV (see 'Browse Smart TV' on page
18)
•
BD Live applications (see 'BD-Live on Blu-
ray' on page 13)
•
Software update (see 'Update software
through the Internet' on page 27)
Caution
•
Familiarize yourself with the network router, media
server software and networking principles. If necessary,
read documentation that accompanies the network
components. Philips is not responsible for lost, damaged,
or corrupt data.
Before you start
•
For Smart TV and software updates, make
sure that the network router has access to
the Internet with high-speed connection
and is not restricted by firewalls or other
security systems.
•
Make the necessary connections described
in quick start guide, and then switch the TV
to the correct source for your SoundStage.
Set up the wired network
What you need
•
A network cable (RJ45 straight cable).
•
A network router (with DHCP enabled).
ETHERNET
1
Using a network cable, connect the
ETHERNET connector on your
SoundStage to the network router.
2
Press .
3
Select [Setup], and then press OK.
4
Select [Network] > [Network
installation] > [Wired (Ethernet)].
5
Follow the onscreen instructions to
complete the setup.
If connection fails, select [Retry], and
•
then press OK.
6
Select [Finish], and then press OK to exit.
•
To view the network settings, select
[Setup] > [Network] > [View
network settings].
Personalize the network name
Name your SoundStage to easily identify it on
your home network.
1
Press .
2
Select [Setup], and then press OK.
3
Select [Network] > [Name your
Product:].
4
Press the Alphanumeric buttons to enter
the name.
5
Select [Done], and then press OK to exit.
www
ETHERNET
EN
11
Advertisement
Table of Contents
