Onkyo TX-SR494DAB Instruction Manual page 75

2. Speaker
„ 1. Configuration
Change the settings of connection environment of the speakers.
Setting Item Default Value
Speaker 7.1 ch
Channels
Subwoofer Yes
Height Speaker Top Middle
Zone B Speaker No
Zone B Output Fixed
Level
Setting Details
Select "2.1 ch", "3.1 ch", "4.1 ch", "5.1 ch", "6.1
ch", "7.1 ch", "2.1.2 ch", "3.1.2 ch", "4.1.2 ch" or
"5.1.2 ch" to suit the number of speaker channels
connected.
Set whether a subwoofer is connected or not.
"Yes": When a subwoofer is connected
"No": When a subwoofer is not connected
Set the speaker type if height speakers are
connected to the SURROUND BACK or HEIGHT
terminals.
Select "Top Middle", "Top Rear", "Rear High",
"Dolby Speaker (Front)", "Dolby Speaker (Surr)",
"Front High" or "Top Front" according to the type
and layout of the connected speakers.
• If the item cannot be selected even though
connection is correct, check if the setting in
"Speaker Channels" matches the number of
connected channels.
Set whether speakers are connected to Zone B
speaker terminals.
"Yes": When speakers are connected to Zone B
speaker terminals
"No": When speakers are not connected to Zone B
speaker terminals
Select whether to adjust the volume on the premain
amplifier in the separate room or on this unit when
outputting to Zone B.
"Fixed": Adjust on the pre-main amplifier in the
separate room
"Variable": Adjust on this unit
• This setting is fixed to "Variable" if "Zone B
Speaker" is set to "Yes".
Contents Connections
≫
Setting Item Default Value
Bi-Amp No
Speaker 6 ohms or above Set the impedance (Ω) of the connected speakers.
Impedance
75
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
Set whether the front speakers are bi-amp
connected.
"No": When front speakers are not bi-amp
connected
"Yes": When front speakers are bi-amp connected
• This setting is fixed to "No" if "Zone B Speaker"
is set to "Yes".
• This setting cannot be selected when surround
back speakers or height speakers are installed.
"4 ohms": When any of the connected speakers
have 4 Ω or more to less than 6 Ω impedance
"6 ohms or above": When the connected speakers
all have 6 Ω or more impedance
• For impedance, check the indications on the
back of the speakers or their instruction manual.
≫