Table of Contents
Advertisement
rDo not install the projector on a ceiling with the power supply unit tilted right or left.
Power
supply
unit
Can be installed
rWhen installing the projector on a sloped ceiling, install in a direction that the pole
side of the power supply unit will be higher than the power <v/b> button side.
Pole side
rWhen using the optional Mount Bracket, do not install the projector on a floor.
Can be installed
rWhen installing the projector to a wall using the optional Mount Bracket, set the pole
side higher than the power <v/b> button side and the power supply unit vertically.
Pole side set at the
higher side
Can be installed
rWhen using the projector in combination with the optional Floor Stand Kit, install on a
horizontal surface.
rWhen using the projector in combination with the optional Mount Bracket or Floor
Stand Kit, use the power cord supplied with the optional accessories, and ground at
the outlet side.
rFocus adjustment
The projection lens is thermally affected by the light from the light source, making the focus unstable in the period
just after switching on the power. It is recommended that images be projected continuously for at least 30 minutes
before the focus is adjusted.
rCautions when setting up the projector
f Do not block the ventilation ports (intake and exhaust) of the projector.
18 - ENGLISH
Chapter 1 Preparation — Precautions for use
Ceiling
Power supply unit
Ceiling
Power <v/b> button side
Can be installed
Ceiling
Wall
Wall
Pole side set at the
lower side
Cannot be installed
Cannot be installed
Cannot be installed
Wall
Can be installed
Wall
Power supply unit set
horizontally
Cannot be installed
Cannot be installed
Floor
Cannot be installed
Power supply unit not
set vertically
Cannot be installed
Advertisement
Table of Contents
