Table of Contents
Advertisement
E-mail error information is displayed if periodic E-mail sending fails.
Note
f [Access error log]/[E-mail error log] displays the recent several hundreds of accesses/requests. All information may not be displayed when
many accesses/requests are made at a time.
f When information in [Access error log]/[E-mail error log] exceeds a certain amount, they are erased from the oldest.
f Check [Access error log]/[E-mail error log] periodically.
[Basic control] page
Click [Projector control] → [Basic control].
1
[INPUT]
Switches the input.
2
[VOLUME]
Adjusts the volume.
3
[BALANCE]
Adjusts the right/left audio balance.
Attention
f When you turn on the projector, be careful so that the eyes of people around the projector are not exposed to the sudden light from the light
source.
Or operate the projector only if the eyes of people around the projector are not exposed to the light from the light source even when
projection starts suddenly.
Note
f When the [NETWORK] menu → [WIRELESS LAN] (x page 77) is set to [M-DIRECT] or [SIMPLE] and web control is performed via
wireless LAN, switching to [MEMORY VIEWER] or [MIRRORING} disconnects the wireless LAN and disables later web control operations.
f When the [NETWORK] menu → [WIRELESS LAN] (x page 77) is set to [M-DIRECT] or [SIMPLE] and web control is performed via
wireless LAN, turning on the power and starting projection with MIRRORING input disconnects the wireless LAN and disables later web
control operations.
g When the [SETUP] menu → [STARTUP INPUT SELECT] (x page 70) is set to [LAST USED]
Turn off the power when the input other than MIRRORING is selected.
If the projector is in standby mode with MIRRORING input, switch the input to other than MIRRORING in the [Basic control] page before
turning on the power.
g When the [SETUP] menu → [STARTUP INPUT SELECT] (x page 70) is set to [MIRRORING]
Switch the input to other than MIRRORING using the remote control after projection has been started or set [STARTUP INPUT SELECT]
to other than [MIRRORING] beforehand.
Chapter 5 Operations — Web control function
1
2
3
4
5
6
4
[PICTURE MODE]
Switches the picture mode.
5
[AV MUTE]
Switches AV mute on/off.
6
[POWER]
Switches on/off the power.
ENGLISH - 111
Advertisement
Table of Contents
