Spot Temperatures
The Spot Temperatures are floating HI and LO temperature indicators that
move on the display as the temperature measurements of the image fluctuate.
To turn on/off the hot and cold spot indicators:
1.
Push .
2.
Push / to highlight Measurement.
3.
Push or to view the menu.
4.
Push / to highlight Spot Temp.
5.
Push or to view the menu.
6.
Push / to toggle this function ON or OFF.
7.
Push:
•
•
•
If the Display is set to Display All, you see the information about
current transmission correction as τ = xxx%.
Shop for Fluke products online at:
to set the change and go back to the live view.
or to set the change and go back to the previous menu.
to cancel the change and go back to the live view.
MyFlukeStore
www.
Performance Series Thermal Imagers
Note
.com
Menus
31
1.888.610.7664