AEG C41022GN User Instructions page 27

Hide thumbs Also See for C41022GN:
Table of Contents

Advertisement

Instructions for the installer
Before making the electric connection, make sure of the safety of the earth.
Make sure that the fuse and the home wiring system are able to withstand the appliance load.
The yellow/green earth cable must not be interrupted at any point.
The electric cable must not come into contact with parts whose temperature is more than 50°C
higher than room temperature.
The cooker should be installed in accordance with the latest edition of the IEE regulations.
12.2.1 Electric power cable section
According to the type of power supply, use a cable that conforms to the following diagram.
The end to be connected to the appliance must have the earth
wire (yellow-green) at least 20 mm longer.
12.2.2 Type of power supply
It is possible to
obtain different
connections
DOUBLE OVEN AND CERAMIC HOB
according to the
mains
voltage
by
connecting
DOUBLE OVEN AND 4 BURNER GAS HOB
the mains cable
WITH FRY-TOP
to the terminal
board as shown
in the following
DOUBLE OVEN AND 6 BURNER GAS
diagram.
MODEL
POWER kW
13,6 kW
6mm cable
7,0 kW
6mm cable
3,9 kW
6mm cable

Advertisement

Table of Contents
loading

This manual is also suitable for:

C41022gC41022vC41022g-m

Table of Contents