Pure Cycle Tm - Samsung WF363 Series User Manual

PuRE CyCLE
Pure Cycle is a self-cleaning cycle that removes any mold from inside the washing machine.
1. Press the Power button.
2. Press the Pure Cycle™ button.
Once you have pressed the Pure Cycle button,
the only function you can set is the Delay Start
function.
for Wf365*,Wf364* models
Select the Pure Cycle™ cycle by turning the
Cycle Selector.
3. Press the Start/Pause button. The Pure Cycle
cycle will start.
The Pure Cycle Auto Alarm function
• If the "Pure Cycle" button is lit after a wash, it
indicates that tub (drum) cleaning is required.
In this case, remove the laundry from the
washing machine, turn the power on, and
clean the drum by running Pure Cycle.
• If you do not run Pure Cycle, the "Pure
Cycle" indicator turns off. However, the
"Pure Cycle" indicator will light again after
two washes. Not running Pure Cycle at
this point will not cause a problem with the
washing machine.
• Although generally, the Pure Cycle Auto Alarm
appears once a month or so, the frequency
may differ depending on the number of times
the washing machine is used
WF361_363_365-02832J-07_EN.indd 29
TM
cleaning and maintaining your washer _29
2014-2-22 15:58:24