Table of Contents
Advertisement
Delayed pyrolysis
Pyrolysis can be programmed to start at a
pre-set time.
After setting the pyrolysis duration, pull
setting knob A and turn it anticlockwise,
positioning timed cooking pointer B at the
start time desired.
60
Installation
4.11 Extraordinary maintenance
Removing and replacing the oven seal
(pyrolytic models excluded)
To remove the oven seal:
• Unhook the clips located in the 4 corners
and then pull the oven seal outwards.
To install the oven seal:
• Hook the clips located in the 4 corners
onto the oven seal.
Oven seal maintenance tips
The seal should be soft and elastic.
• To keep the oven seal clean, use a non-
abrasive sponge and wash with
lukewarm water.
Advertisement
Table of Contents
