Acer XV272 User Manual page 28

Hide thumbs Also See for XV272:
Table of Contents

Advertisement

1.
Press the MENU key to open the OSD.
2.
Toggle the joystick to the up or down to select System from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3.
Toggle to the left or right to control functions.
4.
Input: Select the source from HDMI1, HDMI2, DP.
5.
Auto Source: The default is "On", which can support auto search for signal source in
order.
-----------------------------------------------------------------------------------------------------------
Note: Surround application must set Auto Source is "Off".
6.
DP Format: Default is DP1.2, can selection support DP1.1,1 or DP1.2 format.
7.
Wide mode: You can select which screen aspect you are using. The options are Aspect
and Full.
8.
PIP/PBP settings
-----------------------------------------------------------------------------------------------------------
Note:
1. PIP/PBP function does not support HDMI 1 and HDMI 2 simultaneously.
2. Under PIP & PBP mode, "Auto search" function is unavailable. The PIP/PBP
signal source needs to be selected manually.
HDMI 1
HDMI 2
DP
X: Does not support PIP/PBP function in this input combination
9.
Hot Key Assigment: Select the function of shortcut key 1(Modes, Brightness, Volume,
Gamma, Contrast, Blue Light, Over Drive, PIP/PBP, VRB) and shortcut keys 2 (Modes,
Brightness, Volume, Gamma, Contrast, Blue Light, Over Drive, PIP/PBP, VRB).
10. DDC/CI: Allows the monitor settings to be set through the software on the PC.
-----------------------------------------------------------------------------------------------------------
Note: DDC/CI, short for Display Data Channel/Command Interface, which allows
monitor controls to be sent via software.
11. HDMI Black level: Select to set HDMI black level.
12. Quick start mode: Select Off or On. Turn on to speed up boot speed.
13. Power-off USB charge: Turn On or Off. On: DC off/Saving mode can to electrify for
USB port. Off: DC off/Saving mode can't to electrify for USB port.
PIP/PBP & Input status
HDMI 1
HDMI 2
--
X
O
DP
X
O
--
O
O
--

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xv272u

Table of Contents