Advertisement
Quick Links
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1.
To clean the LCD monitor screen:
•
Turn off the LCD monitor and unplug the power cord.
•
Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2.
Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage
it.
3.
Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4.
Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5.
Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside
this range may result in permanent damage.
6.
Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
•
Monitor-to-PC signal cable is frayed or damaged.
•
Liquid spills onto the LCD monitor or the monitor is exposed to rain.
•
The LCD monitor or case is damaged.
7.
In order to prevent damage to the LCD pannel, do not place the monitor face down on a surface.
Connecting your monitor to a computer
1.
Turn off your computer and unplug your computer's power
cord.
2.
Connect the signal cable to the HDMI (optional) and /
or DP (optional) input socket of the monitor, and the
HDMI (optional) and /or DP (optional) output socket of
the graphics card on the computer. Then tighten the
thumbscrews on the signal cable connector.
3.
Connect the USB Cable(Optional)
Connect the USB 3.0 cable to port for fast charge.
Connect the USB 3.0 cable to port.
4.
Insert the monitor power cable into the power port at the
back of the monitor.
5.
Connect the power adapter and power cord to the monitor,
then to a properly grounded AC outlet.
Note: Audio output is only for audio output model. Please check user manual for more instruction.
1
2
3
4
5
External controls
1
Power button
2
Function key
/
3
Function key
/
Turns the monitor on/off.Blue indicates power on. Amber indicates standby/ power saving mode/
OSD locked.
a.
Press to view Main page. Press again to enter hotkey1 function.
b.
When the Function Menu is active, press this key to view the basic information for your monitor
and current input or reset the custom color settings to the factory defaults.
a.
Press to view Main page.Press again to enter hotkey2 function.
b.
When the Function Menu is active, press this button to select select scenario mode or game
mode .
HDMI 1(2.0)
HDMI 2(2.0)
USB
DP
Advertisement
Related Manuals for Acer XV273K
Summary of Contents for Acer XV273K
- Page 1 Acer LCD Monitor Quick Start Guide (QSG) Important safety instructions Please read the following instructions carefully. To clean the LCD monitor screen: • Turn off the LCD monitor and unplug the power cord. • Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
- Page 2 Consult the dealer or an experienced radio/television technician for help. CE declaration of conformity Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other relevant provisions of EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product.
- Page 3 4K-144Hz Mode Grayscale Mode Power-off USB Charge * All specifications are subject to change without notice. Find manuals and other documents for your Acer product on the official Acer support website. *Annual energy consumption is calculated using the typical power consumption 4 hours per day, 365 days per year. Note: • HDMI1 (2.0): Support max timing resolution (3840x2160-60Hz), Support HDR. • HDMI2 (2.0): Support max timing resolution (3840x2160-60Hz), Support HDR.