Table of Contents
Advertisement
Installation
1.
Turn off your computer and unplug your computer's power cord.
2.
Connect the signal cable to the DP(optional) and /or HDMI (optional) input socket of the monitor, and the
DP(optional) and /or HDMI (optional) output socket of the graphics card on the computer. Then tighten the
thumbscrews on the signal cable connector.
3.
Connect the USB Cable(Optional)
Connect the USB 3.0 cable to port for fast charge.
Connect the USB 3.0 cable to port.
4.
Insert the monitor power cable into the power port at the back of the monitor.
5.
Connect the power adapter and power cord to the monitor, then to a properly grounded AC outlet.
HDMI 1(2.0)
HDMI 2(2.0)
Note: Audio output is only for audio output model. Please check user manual for more instruction.
USB
DP
Advertisement
Table of Contents
