Table of Contents
Advertisement
ENGLISH
56
Interruption of the Descaling Cycle
Once the descaling cycle has started, it must be completed; do not turn off
the machine mid-cycle.
If the machine stops, you can quit the cycle by pressing the on/off button.
If this occurs, or in the event of power failure or accidental disconnection of
the power cord, empty and rinse carefully the water tank, then fi ll it up to
the CALC CLEAN level.
Follow the instructions provided in the "Manual Rinse Cycle" chapter
before brewing any beverage.
If the cycle was not completed, the machine will require another descaling
cycle to be performed as soon as possible.
Advertisement
Table of Contents
