ii. Specify OSD Language.
iii. Specify Keystone.
•
While the Auto Vertical
Keystone is On
•
•
While the Auto Vertical
Keystone is Off
•
•
iv. Specify Auto Source.
v. Specify Menu Type.
Now you've completed the initial setup.
4.
If you are prompted for a password, press the arrow keys to enter a six digit
password. See
5.
Switch all of the connected equipment on.
28
Operation
Press▲/▼key to disable Auto
Vertical Keystone
Press OK for 2 seconds to
enable Auto Vertical
Keystone
Press BACK for 2 seconds to
reset the Vertical Keystone
value
"Utilizing the password function" on page 39
for details.