Table of Contents
Advertisement
Controls and functions
Projector
1.
Focus ring (See
clarity" on page 24
Adjusts the focus of the projected image.
2.
Zoom ring (See
clarity" on page 24
Adjusts the size of the image.
3.
Temperature warning light (See
page 42
for details.)
Lights up or flashes if the projector's
temperature becomes too high.
4.
Power indicator light (See
42
for details.)
Lights up or flashes when the projector is under
operation.
5.
Power (See
"Start up" on page 21
down the projector" on page 30
Turns the projector on or off.
6.
Keystone /
Keystone /
(See
"Correcting keystone" on page 25
"Using the menus" on page 32
Correct keystoning at the top or bottom of the
projected image.
When the on-screen menu is activated, press the
two buttons to move the selection focus left or
right, or make adjustments.
8
Introduction
1
2
3
4
5
6
7
8
"Fine-tuning the image size and
for details.)
"Fine-tuning the image size and
for details.)
"Indicators" on
"Indicators" on page
and
"Shutting
for details.)
Left
Right
and
for details.)
7.
BLANK (See
page 29
for details.)
Used to hide the screen image. You
can press any key on the control
panel to bring the image back.
8.
MODE (See
page 33
for details.)
Depending upon which input signal
9
is selected, there are several picture
10
setup options available.
11
9.
Lamp indicator light (See
6
"Indicators" on page 42
12
Indicates the status of the lamp.
13
Lights up or flashes when the lamp
has developed a problem.
10.
EXIT
Exits and saves the menu settings.
When the on-screen menu is
activated, press this button to move
the selection focus up.
11.
AUTO (See
image" on page 24
Automatically determines the best
picture timings for the displayed
image.
12.
SOURCE (See
signal" on page 23
Sequentially selects the input signal
RGB/YPbPr, Video or S-Video.
13.
MENU (See
on page 32
Turns on the on-screen display
control menu.
When the on-screen menu is
activated, press this button to move
the selection focus down.
"Hiding the image" on
"Application Mode" on
for details.)
"Auto-adjusting the
for details.)
"Switching input
for details.)
"Using the menus"
for details.)
Advertisement
Table of Contents
