Table of Contents
Advertisement
Change general settings
1
Press
SETUP .
2
Select [General Setup] , then press OK .
3
Select and adjust the following settings:
•
[EasyLink Setup] : Sets up EasyLink to
enjoy easy controls of all the HDMI
CEC compliant devices using a single
remote control (see 'Use Philips
EasyLink' on page 12 ) .
•
[Disc Lock] : Restricts play to disc.
Password (PIN code) is required to
unlock the disc before play.
•
[Display Dim] : Changes the brightness
of the display panel.
•
[OSD Language] : Selects the on-
screen display menu language.
•
[Screen Saver] : Enables or disables
screen saver mode. If enabled, the
screen enters idle mode after 10
minutes of inactivity (for example, in
pause or stop mode).
•
[Sleep Timer] : Sets a sleep timer to
switch the home theater to standby
after a speciÀ c time.
•
[DivX® VOD Code] : Displays the
DivX VOD registration code for the
home theater.
4
Press OK to conÀ rm your choice.
Note
•
Before you purchase DivX videos and play them
on the home theater, register the home theater
on www.divx.com using the DivX VOD code.
Change audio settings
1
Press
SETUP .
2
Select [Audio Setup] , then press OK .
3
Select and adjust the following settings:
•
[HDMI Audio] : Enables or disables
HDMI audio output for the TV.
4
Press OK to conÀ rm your choice.
Note
•
For settings related to HDMI, the TV must be
connected through HDMI.
Change video settings
1
Press
SETUP .
2
Select [Video Setup] , then press OK .
3
Select and adjust the following settings:
•
[TV System] : Selects a TV system that
is compatible with the TV.
•
[TV Display] : Selects a picture display
format to À t the TV screen.
•
[Picture Settings] : Selects a
predeÀ ned color setting.
•
[HDMI Setup] : Selects HDMI video
resolution and the wide screen display
format for the TV. The Wide Screen
Display option is only available for 16:9
wide screen TV display setting.
4
Press OK to conÀ rm your choice.
Note
•
The best setting is automatically selected for
the TV. If you need to change the setting,
ensure that the TV supports the new setting.
•
For settings related to HDMI, the TV must be
connected through HDMI.
•
Some video settings depend on the video
source, ensure that the disc and the TV
support the setting or feature.
EN
15
Advertisement
Table of Contents
