Change Settings; Access The Setup Menu; Change General Settings; Change Audio Settings - Philips HTS3510/12 Manual

6

Change settings

This section helps you to change the settings of
your home theater.
Caution
•
Most of the settings are already configured
with the best value for the home theater.
Unless you have a specific reason to change a
setting, it is best to leave it at the default value.

Access the setup menu

1
SETUP.
Press
» The following menu appears.
Symbol
2
Select a setup menu, then press OK.
See the following sections for information
about how to change the settings of your
home theater.
3
BACK to return to the previous
Press
menu, or press
Note
•
You cannot change a setting that is grayed out.
EN
14
Description
[General Setup]
[Audio Setup]
[Video Setup]
[Preference Setup]
SETUP to exit.

Change general settings

1
Press SETUP.
2
Select [General Setup], then press OK.
3
Select and adjust the following settings:
• [Disc Lock] : Restricts play to disc.
Password (PIN code) is required to
unlock the disc before play.
•
[Display Dim] : Changes the brightness
of the display panel.
• [OSD Language] : Selects the on-
screen display menu language.
• [Screen Saver] : Enables or disables
screen saver mode. If enabled, the
screen enters idle mode after 10
minutes of inactivity (for example, in
pause or stop mode).
• [Sleep Timer] : Sets a sleep timer to
switch the home theater to standby
after a specific time.
•
[Auto Standby] : Enables or disables
auto standby. If enabled, the home
theater switches to standby after 30
minutes of inactivity (for example, in
pause or stop mode).
•
[DivX(R) VOD Code] : Displays the
DivX VOD registration code for the
home theater.
4
Press OK to confirm your choice.
Note
•
Before you purchase DivX videos and play
them on the home theater, register the home
theater on www.divx.com using the DivX
VOD code.

Change audio settings

1
SETUP.
Press
2
Select [Audio Setup], then press OK.
3
Select and adjust the following settings:
•
[Speakers Volume] : Sets the volume
of each speaker to obtain the ideal
audio balance.
• [Speakers Delay] : Sets the delay time
for center and rear speakers to obtain
an equal audio transmission from all
the speakers.
•
[HDMI Audio] : Enables or disables
HDMI audio output for the TV.