Change general settings
1
SETUP.
Press
2
Select [General Setup], then press OK.
3
Select and adjust the following settings:
•
[OSD Language] : Selects the on-
screen display menu language.
•
[Screen Saver] : Enables or disables
screen saver mode. If enabled, the
screen enters idle mode after 10
minutes of inactivity (for example, in
pause or stop mode).
•
[DivX(R) VOD Code] : Displays the
DivX VOD registration code for the
home theatre.
4
Press OK to confirm your choice.
Note
•
Before you purchase DivX videos and play them
on the home theatre, register the home theatre
on www.divx.com using the DivX VOD code.
Change audio settings
1
Press
SETUP.
2
Select [Audio Setup], then press OK.
3
Select and adjust the following settings:
•
[Speakers Volume] : Sets the volume
of each speaker to obtain the ideal
audio balance.
•
[Speakers Delay] : Sets the delay time
for centre and rear speakers to obtain
an equal audio transmission from all
the speakers.
4
Press OK to confirm your choice.
Change video settings
1
SETUP.
Press
2
Select [Video Setup], then press OK.
3
Select and adjust the following settings:
•
[TV System] : Selects a TV system that
is compatible with the TV.
•
[TV Display] : Selects a picture display
format to fit the TV screen
•
[Screen Fit] : Selects a full screen
format that best fits to the TV screen.
•
[Picture Settings] : Selects a
predefined colour setting.
•
[Progressive] : Enables or disables
progressive scan mode.
4
Press OK to confirm your choice.
Note
•
The best setting is automatically selected for
the TV. If you need to change the setting,
ensure that the TV supports the new setting.
•
Some video settings depend on the video
source, ensure that the disc and the TV
support the setting or feature.
Change preference settings
1
SETUP.
Press
2
Select [Preference Setup], then press OK.
3
Select and adjust the following settings:
•
[Audio] : Selects audio language for
video.
•
[Subtitle] : Selects subtitle language for
video.
•
[Disc Menu] : Selects menu language
for video disc.
•
[Parental] : Restricts access to discs
that are recorded with ratings. To
play all discs irrespective of the rating,
select level '8'.
•
[PBC] : Displays or skips the content
menu for VCD and SVCD discs.
•
[Password] : Sets or changes a PIN
code to play a restricted disc. Enter
'0000' if you do not have a PIN or if
you have forgotten your PIN.
•
[DivX Subtitle] : Selects a character
set that supports the DivX subtitle.
•
[Version Info.] : Displays the software
version for the home theatre.
•
[Default] : Resets the home theatre to
the default settings programmed at the
factory.
4
Press OK to confirm your choice.
Note
•
If your preferred disc language is not available,
you can select [Other] from the list and enter
the 4-digit language code which can be found
at the back of this manual.
•
If you select a language that is not available
on a disc, the home theatre uses the default
language of the disc.
•
You cannot reset disc lock, password (PIN
code) and parental control settings to their
default values.
EN
11