Table of Contents
Advertisement
Power Connection (Continued)
This DVD player and its automotive adapter are designed for use in vehicles that have 12 volt, negative ground
Automotive
electrical systems. (This is standard for most vehicles.) If your vehicle has a different type of electrical system, the
Adapter
DC power system cannot be used.
Follow steps 1 to 2 to connect.
When disconnecting, reverse the order.
Caution
•
To prevent electrical shock and possible damage to your DVD
player or vehicle, always unplug the automotive adapter from
the cigarette lighter socket before you remove the plug from
your DVD player.
•
A 3 amp. 250V fuse for protection is installed in the
automotive adapter.
•
While the engine is being started, disconnect the
automotive adapter from the car's cigarette lighter socket.
•
Do not operate your DVD player when the car battery is
discharged. Peak current from the car generator may cause the
DC fuse to blow.
•
If the vehicle's supply voltage drops below approximately 10
volts, your DVD player may not work properly.
2
1
•
Do not leave your DVD player in a place where the
temperature exceeds 70°C (158°F), or the pick-up device
may be damaged.
Examples include:
- Inside a car with the windows closed and in direct
sunshine.
- Near a heating appliance.
Automotive adapter
•
This automotive adapter operates on DC 12V.
•
MODEL NO. : DPDC1
•
Manufactured by WANLIDA Digital Technology Co., Ltd.
•
Contact an electrical parts distributor for assistance in select-
ing a suitable automotive adapter.
14
Cigarette lighter socket
Advertisement
Table of Contents
