Audio/Video Connection - LG DP170N Owner's Manual

Audio/Video Connection

Audio Connection to Optional Equipment
Connect the DVD player to your optional equipment for audio
output.
OPTICAL
DIGITAL IN PUT
OR
Amplifier equipped with 2-channel analog stereo or Dolby Pro
Logic ll / Pro Logic: Connect the AUDIO OUT jacks on the DVD
player to the audio left and right IN jacks on your amplifier,
receiver, or stereo system, using the audio cables.
Amplifier equipped with 2-channel digital stereo (PCM) or
audio / video receiver equipped with a multi-channel decoder
(Dolby Digital™, MPEG 2, or DTS): Connect one of the DVD
Player's DIGITAL AUDIO OUT jack to the corresponding in jack on
R L
AUDIO INPUT your amplifier. Use an optional digital audio cable.
Digital Multi-channel sound
A digital multi-channel connection provides the best sound quality.
For this you need a multi-channel audio / video receiver that
supports one or more of the audio formats supported by your DVD
player such as MPEG 2, Dolby Digital and DTS. Check the
receiver manual and the logos on the front of the receiver.
N
• If the audio format of the digital output does not match the
• Six Channel Digital Surround Sound via a digital connection can
• To see the audio format of the current DVD in the on-screen
18
otes
capabilities of your receiver, the receiver produces a strong,
distorted sound or no sound at all.
only be obtained if your receiver is equipped with a Digital
Multi-channel decoder.
display, press AUDIO.