Connect The Automotive Adapter - LG DP273B Owner's Manual

Power Connections (continued)

Connect the Automotive adapter

This unit and its automotive adapter are designed for use in vehi-
cles that have 8.5-16 volt, negative ground electrical systems.
(This is standard for most vehicles.) If your vehicle has a different
type of electrical system, the DC power system cannot be used.
a
a Connect the automotive adapter to the DC IN
the unit.
b Connect the automotive adapter to the car's cigarette lighter
socket.
Caution
• To prevent electrical shock and possible damage to your unit or
• A 3 amp. 250V fuse for protection is installed in the automotive
• While the engine is being started, disconnect the automotive
• Do not operate your unit when the car battery is discharged.
• If the vehicle's supply voltage drops below approximately 10
b
• Do not leave your unit in a place where the temperature
Cigarette lighter socket.
Examples include:
- Inside a car with the windows closed and in direct sunshine.
- Near a heating appliance.
Automotive adapter
• This automotive adapter operates on DC 8.5-16V.
• Contact an electrical parts distributor for assistance in selecting
jack on
• Manufactured by WANLIDA Digital Technology Co., Ltd.
14
vehicle, always unplug the automotive adapter from the cigarette
lighter socket before you remove the plug from your unit.
adapter.
adapter from the car's cigarette lighter socket.
Peak current from the car generator may cause the DC fuse to
blow.
volts, your unit may not work properly.
exceeds 70°C (158°F), or the pick-up device may be damaged.
a suitable automotive adapter.