Table of Contents
Advertisement
Refrigerant pipe installation
Insulating the header joint
X Fasten the header joint using a cable tie and cover the connected part .
X
X Insulate the header joint and the brazing part and wrap the connected part with an
X
adhesive insulation tape to prevent dew formation .
Adhesive insulation
tape
Insulation for the
Insulation for the
refrigerant pipe
header joint
X Fix the header joint with a hanger after insulating it .
X
Insulating the Y-join, liquid & gas side connecting pipe
X Attach the insulation provided with the Y-joint to the insulation purchased privately without a gap . Wrap the connected
X
part with insulation (Purchased privately) of a thickness of at least 10mm (3/8") .
X Use insulation that should be able to handle an interior temperature of over 120°C(248°F) . Wrap the Y- joint with
X
insulation of a thickness of at least 10mm (3/8") .
Pipe insulation
Provided
(Purchased privately)
insulation
Fix securely
without any gap .
Y-joint
150mm
(5 . 9 0")
Thickness of the insulation (Purchased privately)
should be at least thicker than 10mm (3/8") .
30
Fix securely without any gap .
Pipe insulation
(Purchased privately)
Insulation after brazing a stopper
Adhesive insulation tape
Insulation tape
(Purchased privately)
Pipe
Pipe insulation
(Purchased privately)
❋ ❋ Attach the adhesive insulation
tape to the pipe as shown in the
picture after insulating the pipe .
Insulation
Advertisement
Table of Contents
