Connect Power Cord - Philips HTS3373/98 User Manual

Note
•
To listen to the audio output from this
connection, press AUDIO SOURCE
repeatedly until 'OPTI IN' is displayed on the
display panel.
Connect portable media player
MP3
1
Connect a 3.5mm stereo audio cable (not
supplied) to the MP3 LINK jack on this
Home Theater System and the phone
jack on the portable media player (such as
MP3 player).
Note
•
To listen to the audio output from this
connection, press AUDIO SOURCE
repeatedly until 'MP3 LINK' is displayed on the
display panel.
14 EN
Connect USB device
1
Connect the USB device to
on this Home Theater System.
Note
•
This Home Theater System can only play/view
MP3, WMA, DivX (Ultra) or JPEG À les that are
stored on such devices.
•
Press USB to access the content and play the
À les.

Connect power cord

Warning
•
Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the product.
•
Before any connection to power outlet, set the
voltage selector (at the rear or bottom of this
product) to the local power line voltage.
1
Connect the power cord to the power
outlet when all the required connections
are done.
»
The product is ready to be set up for
use.
USB jack