Encore ENRTR-104 User Manual page 33

2-2-4 PPTP
If connected to the Internet
using a (PPTP) xDSL
Modem, enter the PPTP
Account Name, PPTP
Password, Host Name,
Service IP Address, Your IP
Address, Your Subnet Mask
required by your ISP in the
appropriate fields. If your
ISP has provided you with a
Connection ID, enter it in
the Connection ID field, otherwise, leave it zero.
The MTU feature specifies the largest packet size permitted for network
transmission. Enter the value desired, for most DSL users, it is
recommended to use 1460. By default, MTU is set at 1460
The Maximum Idle Time feature can control the connection time while
user's need to save the cost of connection fee from ISP provider (default
time=0, always connect). Click on the Connect-on-demand button to dial
up to the ISP when only on demand, while there is a need of connecting to
the ISP automatically.
2-2-5 DNS
The Domain Name System (DNS) is the way that Internet domain names
are located and translated into Internet Protocol (IP) addresses.
If your ISP provided at least one DNS Server IP Address, type that IP
Address in the Primary DNS address fields. You can type up to another
DNS Server IP Addresses. The Router will utilize these for quicker access
to functioning DNS Servers.
27