Overview
The switch supports the Fabric Extenders (FEXs) listed at
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/hw/interoperability/fexmatrix/fextables.html.
The following figure shows the switch features on the port side of the chassis.
1
Port lane switch button
2
Port lane LEDs
3
Beacon (BCN), Status (STS), and Environment
(ENV) LEDs
4
40-Gigabit QSFP+ APIC-facing interface ports
(26). Ports 1 to 12 and 15 to 26 also support
40-Gigabit-to-4x10-Gigabit breakout cables with
the Dynamic Breakout feature.
To determine which transceivers, adapters, and cables are supported by this switch, see the
Modules Compatibility Information
The following figure shows the switch features on the power supply side of the chassis.
1
Power supply modules (1 or 2) (AC power supply shown) with
slots numbered from 1 (left) to 4 (right).
2
Fan modules (4) with slots numbered 1 (left) and 2 (right).
Cisco Nexus 9332PQ ACI-Mode Switch Hardware Installation Guide
2
Note
All fan modules and power supplies must use the same airflow direction during
operations.
document.
5
40-Gigabit QSFP+ spine-facing ports (6)
6
Screw holes for mounting brackets
7
Grounding pad
5
Console port (1)
6
Grounding pad
Overview
Cisco Transceiver