Cisco Nexus 9396TX Hardware Installation Manual page 25

Installing the Chassis
The shipment should include the following:
• Switch chassis, which includes the following installed components:
• One uplink module:
• M4PC uplink module
• M6PQ uplink module
• M6PQ-E uplink module
• M12PQ uplink module
• Two power supplies (any combination of the following with the airflow direction being the same as for the fan
modules):
• 650-W AC power supply
• 1200-W HVAC/HVDC power supply
• 930-W DC power supply
• Three fan modules (all fan and power supply modules must have the same airflow direction)
• Port-side exhaust airflow with blue coloring (N9K-C9300-FAN2-B)
• Port-side intake airflow with burgundy coloring (N9K-C9300-FAN2)
• Switch accessory kit
• Rack mount kit
Step 2
Check the contents of the box for damage.
Step 3 If you notice any discrepancies or damage, send the following information to your customer service representative by
email:
• Invoice number of the shipper (see the packing slip)
• Model and serial number of the missing or damaged unit
• Description of the problem and how it affects the installation
• Port-side exhaust airflow with blue coloring (N9K-PAC-650W-B)
• Port-side intake airflow with burgundy coloring (N9K-PAC-650W)
• Dual-direction HVAC/HVDC power supply with white coloring (N9K-PUV-1200W)
• Port-side exhaust airflow with gray coloring (UCS-PSU-6332-DC)
• Port-side intake airflow with green coloring (UCSC-PDU-930WDC)
Cisco Nexus 9396TX NX-OS Mode Switch Hardware Installation Guide
Unpacking and Inspecting a New Switch
15