ENGLISH
64
CALC
CLEAN
6
Remove the "INTENZA+" water fi lter (if installed) from the water tank
and replace it with the small white original one.
7
Pour all the descaling solution into the water tank. Then fi ll the water
tank with fresh water up to the CALC CLEAN level.
8
Put the water tank back into the machine.
9
Pull out the carafe dispensing spout to the right up to the "
Place a large container (1.5 l) under both the carafe dispensing spout
and the coff ee dispensing spout.
Descaling Phase
10
Press the "
" button to start the descaling cycle.
11
The machine will start dispensing the descaling solution at intervals.
The bar on the control panel shows the cycle progress. This procedure
takes approx. 20 minutes.
" icon.