Philips Saeco INCANTO HD8914 User Manual page 21

START
CALC
CLEAN
REMOVE
FILTER
2
1
CALC
CLEAN
1 Remove the drip tray and the coffee grounds container, empty and clean
them and put them back into place.
2 Remove the automatic milk frother from the hot water/steam dispensing
spout.
3 Place a large container (1.5 l) under the coffee dispensing spout and the
hot water/steam dispensing spout.
4 When the display shows START CALC CLEAN, press the OK button to
start the descaling procedure. Remove the hot water dispensing spout if
present.
-
The display reminds you that you have to remove the AquaClean
filter.
Note: You can press the escape button to skip descaling. If you want to
start the descaling procedure later, press the MENU button, select MENU
and scroll to select DESCALING. Press OK to confirm.
5 Pour the descaling solution into the water tank. Fill the water tank with
fresh water up to the CALC CLEAN level indication. Place the water tank
back into the machine. Press the OK button to confirm.
-
The first phase of the descaling procedure starts. The machine starts
dispensing the descaling solution at intervals.
-
The display shows the descaling icon, the phase indication and the
duration. This first phase takes 20 minutes.
6 Let the machine dispense the descaling solution until the water tank is
empty.
7 Remove the water tank and rinse it.
8 Fill the water tank with fresh water up to the CALC CLEAN level
indication. Place the water tank back in the machine and press OK.
9 Remove and empty the container and place it back under the coffee
dispensing spout. Press OK to confirm.
10 The second phase of the descaling procedure starts, which is the rinsing
cycle. This phase takes 3 minutes. The display shows the rinsing icon and
the duration of the phase.
Note: If the water tank is not filled up to the CALC CLEAN level, the
machine may require another rinsing cycle.
11 Wait until the machine stops dispensing water. The descaling procedure
is finished when the tick appears on the display.
12 Press the OK button to exit the descaling procedure. The machine starts
heating up and performs the automatic rinsing cycle.
13 Remove and empty the container.
14 Clean the brew group (see 'Cleaning the brew group').
15 Install a new AquaClean filter in the water tank.
Tip: Using the AquaClean filter reduces the need for descaling!
English
21