●
To set input signal selection [Input Selection]
The monitor recognizes the connector through which PC signals are input. When a PC is turned off or
enters the powersaving mode, the monitor automatically displays another signal.
Setting
Auto
Manual
Procedure
1. Choose <Tools> from the Adjustment menu, and press
2. Choose <Input Selection> from the <Tools> menu, and press
The <Input Selection> menu appears.
3. Select "Auto" or "Manual" with
4. Press
Attention
• When "Auto" is selected for <Input Selection>, the monitor's power-saving function works only when all PCs are
in the power-saving mode
36
Chapter 6 Reference
When a PC is turned off or enters the powersaving mode, the monitor
automatically displays another signal.
The monitor detects only the PC's signals currently displaying automatically. Select
an active input signal with
to exit the adjustment.
Function
.
.
or
.
.