Table of Contents
Advertisement
Hardware Setup
Front Panel Connectors: JFP1, JFP2
These connectors are for electrcal connecton to the front panel swtches and LEDs.
The JFP1 s complant wth Intel
JFP1
Front USB 3.0 Connector: JUSB3
USB 3.0 port s backward-compatble wth USB 2.0 devces. Supports data transfer rate
up to 5 Gbt/s (SuperSpeed).
USB 3.0 Bracket (optonal)
Important
•
Note that the pns of VCC and GND must be connected correctly to avod possble
damage.
•
If you want to use a USB 3.0 devce, you must use the USB 3.0 cable to connect to
the USB 3.0 port.
2-14
Front Panel I/O Connectvty Desgn Gude.
®
* The MB layout n ths figure s for reference only.
JFP2
Advertisement
Table of Contents
