Table of Contents
Advertisement
Hardware Setup
5.
Poston the coolng set onto the
retenton mechansm.
Hook one end of the clp to hook
first.
7.
Fasten down the lever.
Important
Whle dsconnectng the Safety Hook from the fixed bolt, t s necessary to keep an
•
eye on your fingers, because once the Safety Hook s dsconnected from the fixed
bolt, the fixed lever wll sprng back nstantly.
2-6
6.
Then press down the other end of the
clp to fasten the coolng set on the
top of the retenton mechansm.
Locate the Fx Lever and lft up t .
8.
Attach the CPU Fan cable to the CPU
fan connector on the manboard.
Advertisement
Table of Contents
