Table of Contents
Advertisement
Chapter 2
2 3
Secure Your Powerline Network by Pairing
All powerline adapters share some common factory settings, and can communicate
with one another. If you want your powerline adapters to communicate only with your
own powerline adapters, you should pair them. Thus a secured powerline network is
formed and other powerline adapters can no longer join your powerline network without
being paired.
Note: You can only pair two devices at a time.
I want to:
Secure my powerline network and prevent other powerline devices from being added
to my network.
For example,
I've extended my network using the Plug & Play method. Now I want to
secure my network.
How can I do that?
1. Verify all powerline devices' Power LEDs
Tips: We recommend that you plug in your powerline devices near each other, or as close to each other
as possible when pairing. Your settings will not be affected. The devices can be relocated to where they are
needed once pairing is complete.
2. Press the Pair button on one of the powerline devices for 1 second. Its Power LED
starts blinking.
3. Within 2 minutes, press the Pair button on another powerline adapter for 1 second.
Its Power LED
process is complete.
Done!
Enjoy your secure powerline network!
starts blinking. When the Powerline LED
Blinking
within 2 minutes
A V
6 0
0
Use Your Powerline Adapter
are solid on.
turns on, the pairing
Blinking
A V
6 0
0
On
8
Advertisement
Table of Contents
