System Status; System Overview - Airlink101 APO1200 User Manual

Wireless n/a 5ghz 200mw outdoor ap
Hide thumbs Also See for APO1200:
Table of Contents

Advertisement

7.5 System Status

This section breaks down into subsections of System Overview, Associated Clients Status, Remote AP, Extra
Information and Event Log.

7.5.1 System Overview

Display detailed information of System, Network, LAN and Wireless in the System Overview page.
System : Display the information of the system.
System Name : The name of the system.
Operating Mode : The mode currently in service.
Location : The reminding note on the geographical location of the system.
Description : The reminding note of the system.
Firmware Version : The current firmware version installed.
Firmware Date : The build time of the firmware installed.
Device Time : The current time of the system.
System Up Time : The time period that system has been in service since last reboot.
Network Information : Display the information of the Network.
Mode : Supports Static or Dynamic modes on the LAN interface.
IP Address : The management IP of system. By default, it's 192.168.2.254.
IP Netmask : The network mask. By default, it's 255.255.255.0.
IP Gateway : The gateway IP address and by default, it's 192.168.2.1.
Primary DNS : The primary DNS server in service.
Secondary DNS : The secondary DNS server in service.
204

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apo1215

Table of Contents