Battery Status And Charging - Philips HX9903/30 Manual

f. Travel case (specific types only)

Battery status and charging

Charging with glass (specific types only)
Charging with travel case (specific types only)
3 Easy start is disabled by holding the mode/intensity button and
by pressing the power button once while on the charger. The
handle will beep once to confirm it is disabled.
Note: Using the Easy-start feature beyond the initial ramp-
up period is not recommended and reduces Philips Sonicare
effectiveness in removing plaque.
Note: Each of the first 14 brushings must be at least 1 minute in
length to properly move through the Easy-start ramp-up cycle.
Note: To achieve clinical efficacy, Easy-start needs to be
deactivated.
Your Philips Sonicare comes with a travel case to make traveling
with your power toothbrush more convenient. It is designed
to accommodate the power toothbrush handle and two brush
heads. Some models come with a USB charging travel case which
connects to your laptop via USB -this allows you to charge your
Philips Sonicare when traveling. For information about charging
your Philips Sonicare with the travel case, see
charging'.
1 Plug the charging base into a wall socket.
2 Place the charging glass on top of the charging base and
place the handle in the glass.
The charging indicator flashes white until your toothbrush is
fully charged.
1 Place the handle in the charging travel case.
2 Connect the charging travel case to a UL 60950-1 and IEC
60950-1 Listed computer, laptop, USB hub, USB receptacle,
or wall adapter. The USB cord is attached to the travel case
and stored in the cord storage compartment.
3 The wall adapter shall have an output marked Class 2 or the
limited power source (LPS) requirements and compatible with
the electrical ratings marked on the travel case.
Contents
English
'Battery status and
13