Acer A221HQV Service Manual page 18

16
ACER A211H/A221HQ
Go to contents page
Put a rear cover on the assembled unit and push
S14
the rear cover on the positions marked as No.1~4 in
priority order for mechanisms engagement.
4
3
2
1
Use a Phillips-head screwdriver to tighten three
S15
screws for fixing hinge with the rear cover.
(No.1~3 Screw size=M4x9, Torque=12±1kgfxcm
Use a Phillips-head screwdriver to tighten three
S16
screws for fix hinge cover with the hinge.
(No.4 ~6 Screw size=M4x8; Torque=6-7kgfxcm
S17 Take a arm, then install the arm to the hinge cover
following the direction as the picture below.
4. Assembly and Disassembly Procedures (continued)
4
3
2
1
1 2
3
4 5
6
Assemble
S18
Align the base cover with the stand and push the
base cover towards the top of the monitor for
assembling the base
Lift up the LCD module, check the acer logo if it is
S19
firmly attached to the front bezel, connect a video
cable and power cord with the monitor and turn on
the monitor for functionality check.
)
Turn off the monitor and remove the video cable
S20
and power cord from the monitor. Stick a screen
protector on the front bezel with adhesive tapes.
)
Take a EPE bag to cover the LCD monitor, put the
S21
monitor face down on the table.
the hinge covers as the below picture.
.