Put the bracket chassis module on the back of
S9
LCD panel module.
Connect FFC cable to LVDS connector, fix the
S10
cable with double faced adhesive tape which is
sticked on the back of cable.
4. Assembly and Disassembly Procedures (continued)
Plug lamp cables to the connectors of power
S11
board, then fix the lamp cables with tapes.
Place a front bezel on a protective cushion
S12
bracket chassis module into the front bezel. Adjust
the position of bracket chassis module till it is firmly
attached to the front bezel.
Take a function key board, then connect the
S13
function key cable with the function key board.
Locate the function board in the hook of the front
bezel, then fix the function key cable with PVC
tapes.
function key board
function key board
ACER A211H/A221HQ
15
Go to contents page
, put
the