Power Management Setup - Acer Veriton M490G Service Manual

Power Management Setup

Parameter
ACPI Aware O/S
ACPI Suspend Mode
Deep Power Off Mode
Power On by RTC Alarm
Power On by PCIE Devices
Power On by PCI Devices
Power On by Modem Ring
Wake Up by PS/2 KB/
Mouse
Wake Up by USB KB/
Mouse
Restore On AC Power Loss
Chapter 2
Description
This item supports ACPI (Advanced Configuration and Power
management Interface).Usethis item to enable or disable the ACPI
feature.
Select an ACPI state.
If Enabled, it will support EUP Lot6 Function.
If Disabled, it will not support EUP Lot6Function.
Enables or Disables to wake up the system by RTC Alarm Function
Enables or disables to wake up the system from a power saving mode
through an event on PCI Express device.
The system can be turned off with a software command. If you enable
this item, the systemcan automatically resume if there is an incoming
call on the PCI. You must use an ATXpower supply in order to use this
feature. Use this item to do wake-up action if inserting thePCI.
This system can be turned off with a software command. If you enable
this item, the systemcan automatically resume if there is an incoming
call on the Modem. You must use an ATXpower supply in order to use
this feature.
Enables or disables to wake up the system from a power saving mode
using a PS2 keyboard or mouse.
If enabled, press any key or click the mouse will wake system from S1/
S3 state.
Enables or disables the system to reboot after a power failure or
interrupt occurs.
Option
YES
No
S3 (STR)
S1 (POS)
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Disabled
Enabled
Enabled
Disabled
Enabled
Disabled
Power Off
Power On
Last State
20