Download Print this page

Bernina 380 Manual page 15

Advertisement

Bobbin Case
To remove the bobbin case
raise needle
power switch to «0» (off)
open the bobbin cover
grasp the latch of the bobbin case
remove bobbin case
To insert the bobbin case
hold the bobbin case latch
the finger on the case should point upwards
insert the case so that it clicks into place
Bobbin thread cutter
insert the bobbin case
take the thread over cutter A and cut it
close the bobbin cover
A
033301.71.04_2014-02_Manual_B330_B350_PE_B380_EN
The bobbin thread does not have to be brought up as the loose end
is just the right length to start sewing.
Preparation - Sewing
13

Advertisement

loading

This manual is also suitable for:

350 pe330B330B350 peB380