Bernina 380 Manual page 12

Preparation - Sewing
10
Foot Control
LED Sewing Light
Slide-on Table *
Sewing speed control
control the sewing speed by pressing the foot control
█
Self storing cord
wind the cable around the spool
█
insert the plug into the groove provided
█
While sewing
unwind the cable
█
The LED sewing light illuminates the sewing area and has a long product life.
Please note that a defective sewing light must ONLY be re-
placed by an authorized technician.
The sewing computer must be taken to an authorized BERNINA
dealer!
The slide-on table increases the sewing surface.
Attaching the slide-on table
raise needle and presser foot
█
slide over free-arm to the right until it engages
█
Removing the slide-on table
raise needle and presser foot
█
press button down and pull off slide-on table to the left
█
033301.71.04_2014-02_Manual_B330_B350_PE_B380_EN