Power & Power Management; Hardware Monitor Function - Acer Aspire M1610 Service Manual

•
High Definition Audio 6 Ports Connector with Line In, Line Out, Microphone, Surround, CEN/LFE
and Side-Surround Vertical Audio connector with Line In, Line Out and Microphone
Power & Power Management
Two power management modes are supported in BIOS: Advanced Configuration and Power Interface (ACPI
2.0) or Advanced Power Management (APM 1.2).
•
Supports single power/sleep button user model
•
OS can turn system off (Soft Off feature)
Wake-Up Event From ACPI State
Power button S1, S3, *S4, S5
RTC alarm S1, S3, *S4, S5
LAN S1, S3, *S4, S5
USB S1, S3
PCI S1, S3, *S4, S5
PS/2 S1, S3
Serial port S1, S3, *S4, S5
•
Suspend all devices that support power down modes
•
Fan speeds = On/Off
•
Support ACPI S0, S1, S3, & S5 System States
*S4 implies OS support only (WinME, Win2000, WinXP)

Hardware Monitor Function

The Super I/O (ITE IT8718F) support Hardware Monitor function in below features.
•
VID0-VID7 input pins for CPU Vcore identification
•
Built in 8-bit Analog to Digital Converter.
•
2 thermal inputs from optionally remote thermistors or 2N3904 transistors or Pentium 4 thermal
diode output
•
6 external voltage detect inputs
•
9 intrinsic voltage monitoring (typical for Vbat, +5VSB, +5VCC)
•
2 fan speed monitoring inputs
•
2 fan speed control (DC analog output)
•
WATCHDOG comparison of all monitored items
•
SST/PECI/AMDSII/F Support.
Chapter 1
Comments
-BIOS setting
-BIOS setting
-BIOS setting
-BIOS setting
via #PME signal
-BIOS setting
-S4 and S5 support External Modem only
13