Controls And Displays; Front Panel; Display - Pioneer PD-D9MK2-K Operating Instructions Manual

03

Controls and displays

Chapter 3
Controls and displays

Front panel

1
POWER
OFF ON
7
POWER OFF ON (page 12)
1
2 STANDBY indicator
3 Display (below)
4 Disc tray

Display

1
TRACK TRACK
1 TRACK – Lights when the track number is
indicated.
/ – Light during playback/when paused.
2
Note
1 • When the unit is in the standby mode, if the power is turned off by pressing the main unit's POWER button, the power will
not turn on if the button is pressed again. To turn on the power in this case, press either the remote control unit's
CD PLAYER  button or a different button (other than the POWER button) on the main unit.
• When the unit is in the standby mode, if the power is turned off by unplugging the power cord, the power will not turn merely
by reconnecting the power cord. To turn on the power in this case, reconnect the power cord and then press either the remote
control unit's CD PLAYER  button or a different button (other than the POWER button) on the main unit.
10
En
2
3
STANDBY
PURE AUDIO
8
1
2 3 4 5 6
LEGATO ALL LEGATO ALL REPEAT REPEAT
SACD SACD TOTAL TOTAL RANDOM RANDOM
REMAIN REMAIN PGM PGM
7 8
4
 (page 12)
5
/ (page 12)
6
7 Remote sensor
8 PURE AUDIO indicator (page 14)
3 Scan display – Shows the scan speed.
4 SACD – Lights during SACD playback.
5 LEGATO – Lights when Legato Link Pro is
switched on (page 14).
6 (ALL) REPEAT/RANDOM/PGM – Light to
indicate the playback mode (page 13).
7 Character display
8 TOTAL/REMAIN – Indicate the disc/track
information currently displayed (page 14).
5 6
D9