Connect An Ethernet-Enabled Device To The Extender; Connect A Device To The Extender Network Using Wps - NETGEAR EX6410v2 User Manual

To connect to the extender WiFi network:
1. On your WiFi-enabled computer or mobile device, open the WiFi connection
manager that manages your WiFi connections.
The WiFi connection manager scans for WiFi networks in your area.
2. Find and select your WiFi network name (SSID) and enter your WiFi password.
This is the SSID and password that you set up during the installation process.

Connect an Ethernet-enabled device to the extender

After the extender is connected to your existing WiFi network, you can connect a wired
device to the extender using an Ethernet cable.
Figure 5. Ethernet-enabled device connected to the extender

Connect a device to the extender network using WPS

For help with the WPS button on your WPS-enabled device, check the instructions or
online help that came with that device. Some older equipment cannot use WPS.
To connect to the extender using a WPS connection:
1. Press the WPS button on the extender.
The WPS LED blinks green.
2. Within two minutes, press the WPS button on your WPS-enabled device.
If your WPS enabled device successfully connects to extender, the WiFi connection
manager on your device will show connection status.
Get started
AC1900 WiFi Mesh Extender
18 User Manual