Connect An Ethernet-Enabled Device To The Extender; Connect A Device To The Extender Network Using Wps - NETGEAR Essentials EX6420 User Manual

Connect an Ethernet-enabled device to the extender

After the extender is connected to your existing WiFi network, you can connect a wired
device to the extender using an Ethernet cable.
Figure 4. Ethernet LAN port

Connect a device to the extender network using WPS

For help with the WPS button on your WPS-enabled device, check the instructions or
online help that came with that device. Some older equipment cannot use WPS.
To connect to the extender using a WPS connection:
1. Press the WPS button on the extender.
The WPS LED blinks white.
2. Within two minutes, press the WPS button on your WPS-enabled device.
If your WPS enabled device successfully connects to extender, the WiFi connection
manager on your device will show connection status.
Get started
AC1900 WiFi Mesh Extender Essential Edition
DVD PLAYER
ON/STANDBY
18
P-SCAN
OPEN?CLOSE PLAY STOP POWER
PROGRESSIVE SCAN
User Manual