Connect With The Netgear Nighthawk App - NETGEAR EX6410v2 User Manual

Connect with the NETGEAR Nighthawk app

You can use the NETGEAR Nighthawk app to connect your extender to your existing
WiFi router network. To use the Nighthawk app, you need a smartphone or tablet that
supports iOS or Android apps.
To use the NETGEAR Nighthawk app to connect the extender to your WiFi router:
1. On your smartphone or tablet, go to the Google Play™ store or the Apple App
Store® and download the NETGEAR Nighthawk app.
2. Open the WiFi connection manager, then locate and connect to the extender network
called NETGEAR_EXT.
3. Launch the Nighthawk app.
4. Follow the step-by-step instructions to set up your extender.
5. When you're done with the installation, unplug the extender and move it to a new
location about halfway between your router and the area with a poor WiFi signal.
The location that you choose must be within the range of your existing WiFi router
network.
6. Use the Router Link LED to help you choose a spot where the extender-to-router
connection is optimal.
7. If the Router Link LED doesn't light amber or green, move the extender closer to the
router and try again.
Keep moving the extender closer to the router until the Router Link LED lights amber
or green.
Get started
AC1900 WiFi Mesh Extender
11 User Manual