Smeg SBS66 Series User Manual Manual page 15

Removing Refrigerator Door
1
Unscrew top hinge cover with a screwdriver.
Insert a thin screwdriver into the
side groove of the cover to remove.
2
Turn top hinge fastener counterclockwise 3~4 times.
Disconnect harness wires (model dependent).

3
Lift the door straight up to remove.
Replacing Freezer Door
1
Insert the water tube into the hole of the bottom hinge
pin first.
2
Let the top of door close to the cabinet and insert the
top hinge pin to the top hole of freezer door.
(Insert the back of hinge to the groove of protrusion
first, then front to the top hole of door.)
3
Turn the hinge fastener tightly to the end.
Connect harness wirings and screw down the ground wire.
4 Fasten the bending tube guide and insert the water
tube far into the coupling.(Dispenser models only)
Replacing Refrigerator Door
1
Insert the bottom hole of refrigerator
door straight into the bottom hinge pin.
2 Let the top of door close to the cabinet and insert the
top hinge pin to the top hole of refrigerator door.
(Insert the back of hinge to the groove of protrusion
first, then front to the top hole of door.)
3
Turn the hinge fastener tightly to the end.
Connect harness wirings (model dependent) and screw
down the ground wire. Click and screw the top hinge
cover.
13