Epson EcoTank ET-3800 Series User Manual page 192

Adding or Replacing the Computer or Devices
7. Close the screen.
The screen automatically closes after a specific length of time.
Note:
If connection fails, restart the wireless router, move it closer to the printer, and try again. If it still does not work, print a
network connection report and check the solution.
8. Press the
button.
Related Information
"Checking the Network Connection Status" on page 197
&
Making Wi-Fi Settings by PIN Code Setup (WPS)
You can automatically connect to a wireless router by using a PIN code. You can use this method to set up if a
wireless router is capable of WPS (Wi-Fi Protected Setup). Use a computer to enter a PIN code into the wireless
router.
1. Select
on the home screen.
To select an item, use the
2. Select Wi-Fi (Recommended).
If the printer has already been connected by Ethernet, select Router.
3. Press the OK button.
If the network connection is already set up, the connection details are displayed. Select Change Settings to
change the settings.
If the printer has already been connected by Ethernet, select Change to Wi-Fi connection., and then select Yes
after checking the message.
4. Select Others > PIN Code Setup (WPS).
u d l r
buttons, and then press the OK button.
>
Re-setting the Network Connection
192
> ...
Making Wi-