Table of Contents
Advertisement
ADJUSTING THE AUDIO SETTINGS
To adjust the audio settings:
Menu
>
Audio
>
OK
Use the Arrow buttons to highlight the setting you wish to adjust, then press
Left/Right Arrow buttons to change the setting:
•
Speakers — Turn the built-in speakers On
Audio
or Off.
•
Volume
Control
Display — Turn
the
Speakers
on-screen volume display slider On or Off.
Volume Control Display
Surround Sound
•
Surround Sound — Surround sound uses
DTS TruSurround™ to deliver an immersive
Volume Leveling
surround sound experience from the TV's
Balance
internal speakers . TruSurround completes
Lip Sync
the entertainment experience by providing
Digital Auto Out
deep, rich bass, crisp details, and clear,
Analog Audio Out
intelligible dialog. Select On or Off.
•
Volume Leveling — Volume leveling uses
DTS TruVolume™ to maintain consistent
volume levels during transitions between
program content, AV formats, and input
sources. Select On or Off. In a few cases, volume leveling may artificially suppress
volume increases, making it difficult to hear dialog or flattening sudden noises.
If this occurs, turn volume leveling off.
•
Balance — Adjusts the loudness of the audio output from the left and
right speakers .
TIP: When the TV speakers are set to On, DTS signals cannot be
passed through digital audio outputs .
•
Lip Sync — Adjusts the synchronization between the display image and the
accompanying audio track .
•
Digital Audio Out — Changes the type of processing for digital audio out and
HDMI ARC output when connected to a home theater audio system . Select Auto,
PCM, Dolby D or Bitstream .
- To hear talk back when Talk Back function is enabled, digital audio out must
be set to PCM .
•
Analog Audio Out — Sets the volume control properties for the RCA connector
when connected to a home theater audio system . Select Variable if you are
controlling the volume with the TV's volume controls, or select Fixed if an
external audio device (sound bar or AV receiver) will control the volume .
Auto
On
On
TIP: You must select Bitstream for audio with more than two
On
channels (e .g ., 3 .0, 5 .0, or 5 .1) .
Auto
Fixed
3
21
Advertisement
Table of Contents
