Table of Contents
Advertisement
Removing or Moving Channel Presets:
1.
Press and hold the
Select button.
2.
Select whether to remove or move the preset. (Figure 4)
3.
If Remove was chosen, the preset is removed from the presets list. (Figure 5)
4.
If Move was chosen, the list of the presets will be displayed. Use the
choose a new location and press the
the new location.
Figure 4
Figure 4
38
[
]
Operation
Media Dial to
Select button. The preset will then be moved to
Figure 5
Figure 5
Pausing a Live Broadcast
If you are unable to continue listening to a live broadcast but do not want to miss the broad-
cast, you can pause and record the channel for up to 60 minutes.
Pausing a Live Broadcast:
1.
Press
Play/Pause to pause a live broadcast.
2.
The audio will mute and a time bar will be shown near the bottom of the display screen
indicating the memory capacity and how much of the memory is filled with the broadcast.
(Figure 1)
Figure 1
Figure 1
Notes:
When a broadcast has been paused, the time bar will fill from the right (live broadcast) to the
left, and the time display indicate how much of the broadcast has been paused. The
tor within the time bar indicates your current listening position
When the recording memory is 10 seconds from becoming full, two beeps will be heard (if
system sounds are enabled), and when the memory becomes full, play of the broadcast will
automatically begin. The live broadcast will continue to be recorded, overwriting the oldest
portion of the recorded broadcast however, when the memory is full, you will be unable to
rewind through the broadcast.
Within the time bar, vertical lines indicate segments, which are where a new song or show
begins, or where there was some other break in the broadcast. You can fast-forward or rewind
indica-
[
]
39
Operation
Advertisement
Table of Contents
