Installation; Hardware Installation - D-Link DCS-932L User Manual

Section 2 - Installation

Installation

Hardware Installation

Connect the Ethernet Cable
Connect the included Ethernet cable to the network cable connector
located on the bottom panel of the DCS-932 and attach it to the
network.
Attach the External Power Supply
Attach the external power supply to the DC power input connector
located on the bottom panel of the DCS-932 and connect it to
your wall outlet or power strip. Power is confirmed when the green
LED Power Indicator located below the lens on the DCS-932 is
illuminated.
D-Link DCS-932 User Manual 9